Don’t risk draining your pool – choose a safe alternative!

Real Estate

There are very few reasons why a person should need to drain their pool. In reality, draining the pool is risky and can cause major damage. Thanks to improved technology in the industry, pool owners now have alternative water treatment options to help avoid drainage hazards. As a result, residential pools can last longer than ever.

Pools are designed to be filled with water and are not structurally sound when empty. When a pool is drained, three adverse things can happen. For starters, the shell will record itself every time it is drained. Plaster pools are especially notorious for becoming porous the more often they are drained. This results in algae growth and sometimes the only way to repair this damage is to recast. The second risk is cracking or bursting of the shell. This can occur in both plaster and pebble pools. Sections of the shell may come off and fall off, and small or large cracks may appear. The third risk is due to the hydrostatic pressure that can build up under the pool. When the pool is empty and the pressure is higher under the pool than above the pool, everything can lift/float off the ground. In this case, the damage is usually irreparable. These risks can be completely avoided by choosing the right water treatment. Understanding the reasons why a pool should be drained and the alternative options available is the first step in avoiding undue damage.

Green pool water does not need to be drained. This is the most common reason why pools drain unnecessarily. The factors that contribute to the growth of algae are the lack of chlorine and the abundance of phosphates in the water. Once these two things are solved, with a quality algaecide and a phosphate remover, the water should return to its normal state. For the most part, a decent pool with a working filter should be able to clean even the greenest water on its own. It will take time, attention, and the right chemical balance, but green water can almost always be transformed into crystal clear water without draining.

High levels of combined chlorine, sometimes referred to as chlorine lock, is a phenomenon that can occur. When chlorine added to water does not have the desired disinfecting effect, it is usually due to combined chlorine. A common characteristic that denotes this is the strong “chlorine smell” that is detected around the pool. When cyanuric acid levels exceed 80 ppm, or when the PH is not balanced, there is a greater risk of this occurring. A common condition is that the chlorine will molecularly bind to cyanuric acid and other unwanted chemicals and will not leave enough free chlorine to destroy organic substances in the water. Traditionally, the only way to remove cyanuric acid is by draining and refilling. Thanks to recent advances in pool care techniques, it is possible to extract cyanuric acid and combined chlorine from the water without draining it. Reverse osmosis is sometimes used to accomplish this. Ion exchange treatment units will also remove contaminants from the water and eradicate chlorine blockage. This is achieved by recycling the water through activated carbon filters along with ion exchange units.

Substances that cause hardness combine over time with evaporation and chemicals that are added to the water. High levels of hardness cause damage to swimming pools. Evidence of high calcium levels can be seen in the white deposits on the tiles around the pool’s water line. If the calcium is especially high, calcium deposits can form underwater on the shell of the pool. If the calcium gets too high (above 500 ppm) and leaves deposits, it may be necessary to hire a tile cleaning company to remove scale around the water line and drain areas. If calcium nodules have formed underwater, it may be necessary to chip and re-plaster the pool. It is much better to avoid these problems by keeping calcium levels low. A common and outdated method of reducing calcium levels is to drain the pool and refill it. As mentioned above, this is potentially dangerous and can cause damage. The same alternative “no drain” methods used to reduce cyanuric acid levels are also effective in reducing calcium hardness.

Given the risks involved in draining, the only legitimate reason to do so is to repair submerged components or to acid wash the interior of the pool. Even these procedures can be performed without a drain in most situations. Today, it’s safer and smarter to avoid the risks of draining your pool completely and choose a risk-free alternative.

The first of the two alternatives to drainage is reverse osmosis. Reverse osmosis in a swimming pool is done by passing the water through a large reverse osmosis system housed on a trailer. The water is recycled back into the pool free of cyanuric acid and unwanted chemicals. Calcium levels can also be reduced to a lower, more balanced range. The disadvantage: it does not conserve all the water and part is lost in the process. It is also a bit expensive for most pool owners.

The second alternative to drainage is ion exchange. Ion exchange employs the use of commercial grade water softeners in conjunction with activated carbon filters to filter out contaminants and hardness. The water is recycled through a system that is usually installed next to the pool and works silently for about 12 hours. All the water is conserved and unwanted chemicals are removed along with calcium harness and cyanuric acid. Calcium hardness is reduced to 150 to 200 parts per million leaving pool water sparkling and healthy. This treatment is more affordable than reverse osmosis.

Leave a Reply

Your email address will not be published. Required fields are marked *